Plasterboard Fixings Guide: Which Wall Plug Do I Need?

fischer DUOBLADE S self-drilling plasterboard fixing with screw

An ordinary plastic wall plug works in brick because the brick grips it all the way round. In plasterboard there is nothing behind the board but a void, so a standard plug just spins or pulls out. Plasterboard fixings get around this either by cutting a strong thread into the board or by opening out behind it so the load is spread over a wider area. This guide explains the main types, what each one is for and how to choose the right fixing for the job.

First, Check What Your Wall Is Made Of

Knock on the wall. A hollow sound usually means plasterboard on a timber or metal stud frame. A hollow sound with solid patches can mean dot and dab, where the board is stuck to a masonry wall with blobs of adhesive and there is a gap behind it. A dull, solid sound means brick or block. Before drilling anywhere, use a detector to check for cables and pipes, and remember that cables often run vertically and horizontally from sockets and switches.

If you can find a stud, fixing straight into the timber with a wood screw is the strongest option for heavy items. Where there is no stud in the right place, use a plasterboard fixing rated for the load.

The Main Types Of Plasterboard Fixing

Self-Drilling Plasterboard Plugs

These screw straight into the board without drilling a hole first, cutting a coarse thread that grips the plaster. They are quick and tidy for light and medium loads such as pictures, light fittings, switches, cable trunking and curtain rails.

  • fischer GK – nylon, screwed in with the supplied setting tool, for 4–5mm wood, self-tapping and chipboard screws. Suits single and double plasterboard but not fibre or tiled plasterboard.
  • fischer GKM – the metal version, 4–5mm x 31mm, supplied with pan head screws and a pozi bit.
  • fischer DUOBLADE S – a self-drilling fixing with a black metal tip that works in gypsum plasterboard and gypsum fibreboard, for 4–5mm screws, hooks and eye screws. Ideal for smoke detectors, curtain rods and shutters.
  • TIMCO Metal Speed Plugs – 31.5mm zinc plated self-drilling plugs supplied with screws, in bags or a trade box of 100.

Universal Wall Plugs

A universal plug such as the fischer DUOPOWER is made from two types of nylon. In solid brick or block it expands; in plasterboard and other hollow materials it folds or knots behind the board. That makes it a handy plug to keep in the van when you are not sure what is behind the wall. The 6 x 30mm size, for example, goes in a 6mm hole and takes 4–5mm screws.

Metal Cavity Anchors

Metal cavity anchors fit into a drilled hole and open out behind the board as they are set, spreading the load over the back of the plasterboard. Because the anchor stays in place, you can remove and refit the screw later. They are a good choice for shelves, mirrors, towel rails and bathroom accessories. Choose the length to suit the board thickness.

Spring Toggles And Heavy Duty Anchors

Spring toggles have wings that fold flat to pass through the hole and spring open in the cavity. They grip over a wide area for heavier items, but if you take the screw out the toggle drops into the void, so fix the item to the screw before you insert it. For heavier loads the TIMCO Zip-Fix M6 anchor uses a 13mm hole and M6 screws and is listed for plasterboard, hollow block, cavity walls and ceilings. The TIMCO Stella-Fix is a universal anchor for boards from 3 to 18mm thick that also works in concrete and block.

Dot And Dab Fixings

On dot and dab walls a normal plasterboard fixing only grips the board, and the air gap behind it means heavy items can pull the board away from the wall. The TIMCO Corefix Radiator & Boiler Kit fixes through the board and the gap into the masonry behind, with a core insert that stops the board being crushed as you tighten the screw. It needs a 10mm hole at least 100mm deep.

Which Fixing For Which Job?

Job Suggested Fixing
Pictures, light fittings, switches, trunking Self-drilling plug (GK, GKM, DUOBLADE S, speed plug)
Curtain poles, blinds, smoke alarms DUOBLADE S or metal cavity anchor
Shelves, mirrors, bathroom accessories Metal cavity anchor or universal plug
Heavier shelving and storage Spring toggles, Zip-Fix or a fixing into a stud
Radiators and boilers on dot and dab Corefix through to the masonry
TVs and kitchen wall units Fix into studs or masonry, following the bracket or cabinet instructions

This table is a starting point, not a load rating. Always check the load stated by the fixing manufacturer, allow a good safety margin and spread the weight across several fixings. For kitchen wall units, see our guide on how to hang kitchen wall cabinets.

What About Brick And Block Walls?

In solid walls a plastic plug is still the simplest fixing. TIMCO colour-coded plugs make matching easy: yellow plugs take a 5.0mm drill and 3.0–4.5mm screws, red a 5.5mm drill and 3.5–5.0mm screws, brown a 7.0mm drill and 4.0–6.0mm screws, and blue a 10.0mm drill and 6.0–8.0mm screws. For crumbly or hollow masonry, a universal plug or a resin anchor from our Anchors & Resins range is more reliable.

Tips For A Secure Fixing

  • Drill the exact hole size stated for the fixing – an oversized hole is the most common reason a fixing spins.
  • Do not use a hammer action on plasterboard; it breaks up the board around the hole.
  • Do not overtighten self-drilling plugs or they will strip the plaster.
  • Use the screw diameter the fixing is designed for, and make the screw long enough to pass through the item plus the fixing.
  • Only use fixings on ceilings where the manufacturer says they are suitable.

Browse the full range in our fischer, TIMCO and Anchors & Resins collections.

Frequently Asked Questions

Can I Use Normal Wall Plugs In Plasterboard?

Not reliably. Standard plastic plugs need solid material all round to expand against. In plasterboard use a self-drilling plasterboard plug, a universal plug that knots behind the board, or a cavity anchor.

What Is The Strongest Plasterboard Fixing?

Fixings that open out behind the board, such as spring toggles and heavy duty cavity anchors, spread the load the most. For very heavy items, fix into a stud or through to the masonry behind instead.

Do I Need To Drill A Hole For Plasterboard Fixings?

Self-drilling plugs such as fischer GK, GKM, DUOBLADE S and TIMCO speed plugs screw straight into the board. Cavity anchors, spring toggles and universal plugs need a drilled hole of the stated size.

How Do I Fix To A Dot And Dab Wall?

Use a fixing that goes through the board and the gap into the masonry behind, such as the TIMCO Corefix kit, so tightening the screw does not pull the board towards the wall.

Can I Hang A TV On Plasterboard?

Fix TV brackets into studs or solid masonry wherever possible, following the bracket manufacturer’s instructions. If you are unsure what the wall can take, ask a qualified tradesperson.