Fix 4 Fire 6x32mm Oval & Pan Head 18th Edition Fire Resistant Screws
£2.99
In Stock
Safe Payment
Pay with the world’s most payment methods.
Confidence
Protection covers your purchase
Worldwide Delivery
Ship to over 200 countries & regions.
Applications
· All steel screw fixing for direct fastening into many common building substrates
· Suitable for light to medium duty anchoring
· Will fix into wood and plasterboard without pre-drilling
· Can be directly screwed into sandstone, concrete, brick and stone with a pre-drilled pilot hole of 5.5mm. In softer substrates, 5mm may be more appropriate
· Designed to assist with compliance to BS 7671 amendment 3 and the Wiring Regulations 18th Edition
· Ideal for fixing fire-resistant clips, consumer units, back boxes, conduit, cable trunking, smoke alarms etc.
· Remove the need to use plastic wall plugs - which typically melt at circa 160°C
Specification
· Made from heat treated C1018 - 1022 steel, 9.8 grade, with a Phillips recess, available with two head types
· Melting point of the material is circa 1500°C
· Tested to 975°C for a full 2 hours and retains its physical integrity
· Silver Ruspert® coated to 1000 hour salt spray specification for high corrosion resistance
· Resistant to fire, corrosion, solvents and chemicals
Product Code - 211-100-010
Size – 6x32mm
Head Type – Pan
Drill Diameter Hard Substrates – 5.5mm
Drill Diameter Soft Substrates – 5mm
Minimum Screw Embedment – 19mm
Product Code - 211-100-020
Size – 6x32mm
Head Type – Oval
Drill Diameter Hard Substrates – 5.5mm
Drill Diameter Soft Substrates – 5mm
Minimum Screw Embedment – 19mm
· All steel screw fixing for direct fastening into many common building substrates
· Suitable for light to medium duty anchoring
· Will fix into wood and plasterboard without pre-drilling
· Can be directly screwed into sandstone, concrete, brick and stone with a pre-drilled pilot hole of 5.5mm. In softer substrates, 5mm may be more appropriate
· Designed to assist with compliance to BS 7671 amendment 3 and the Wiring Regulations 18th Edition
· Ideal for fixing fire-resistant clips, consumer units, back boxes, conduit, cable trunking, smoke alarms etc.
· Remove the need to use plastic wall plugs - which typically melt at circa 160°C
Specification
· Made from heat treated C1018 - 1022 steel, 9.8 grade, with a Phillips recess, available with two head types
· Melting point of the material is circa 1500°C
· Tested to 975°C for a full 2 hours and retains its physical integrity
· Silver Ruspert® coated to 1000 hour salt spray specification for high corrosion resistance
· Resistant to fire, corrosion, solvents and chemicals
Product Code - 211-100-010
Size – 6x32mm
Head Type – Pan
Drill Diameter Hard Substrates – 5.5mm
Drill Diameter Soft Substrates – 5mm
Minimum Screw Embedment – 19mm
Product Code - 211-100-020
Size – 6x32mm
Head Type – Oval
Drill Diameter Hard Substrates – 5.5mm
Drill Diameter Soft Substrates – 5mm
Minimum Screw Embedment – 19mm
FEATURED PRODUCTS
TOP RATE PRODUCTS
Door Buffer, D7 x 1.5mm, in Pairs
From £1.99